PAPR with watertight version

A most innovative PAPR with detachable Full Face Mask.

 

The System comprises of  :

  • Turbine Motor with adjustable flow upto170 lpm.
  • Twin filter P3 for ( Particulates).
  • PU coated Corrugated Tube.
  • Full Face Mask TR 2002 – water proof design

SPASCIANI PAPR FOR PARTICULATES FILTER WITH FULL MASK

(WATER DECONTAMINATION  VERSION)

                                                                                                    

A most innovative PAPR with detachable Full Face Mask.

 

The System comprises of  :

  • Turbine Motor with adjustable flow upto170 lpm.
  • Twin filter P3 for ( Particulates).
  • PU coated Corrugated Tube.
  • Full Face Mask TR 2002 – water proof design

 

The unique features :

  • Water proof design.
  • Turbine body with Body panel indicating flow at either 120 lpm, 130 lpm or 170 lpm. User can set at desired level
  • The On/off switch is placed on the top body panel which is pressed for switch on and is kept pressed and hold for few seconds to avoid accidental switch off.
  • No separate Flow meter required  and  No calibration required.
  • Twin filters for ALL PARTICULATES – P3 for 99.97 % filtering efficiency certified to EN 14387 & 143 made of microglass fibres with shelf life of 7 years.
  • The Filters are mounted downwards on the back so that the contamination, invariably, is not directed towards the filter which increases the life of the filter.
  • The unit automatically selects the correct flow of 130 lpm and keeps that value for the entire service time electronically compensating the battery discharge and/or filter clogging.
  • It gives audio-visual warning for Filter clogging and end of battery service life.
  • Is suitable for decontamination shower while in operation.
  • The Lithium Polymer battery pack is held in a special plastic container inserted into the unit body, held in place by means of two fixing screws. It is rechargeable insitu or from the outside through a coaxial connector.
  • It provides 9 hours autonomy every charge when used with P3 filters.
  • The Turbine is placed on the waist and has an outlet hose to be attached to the inlet of the Full Face mask positioned in the front of the Respiratory section to get maximum flow.
  • IT HAS A SWEPT BACK DESIGN.
  • The Full Face Mask is made of soft, odourless hypoallergenic Black EPDM elastomer
  • The Revert seal of the Mask is a bellow type ergonomic seal 40 mm wide to fit perfectly to every face shape avoiding uncomfortable pressures.
  • It has a deep chin cup, an inner mask and metal speech diaphragm with a synthetic material protection guard.
  • VISOR : It  has a scratch and solvent resistant polycarbonate TOTAL Vision Visor covering forehead to chin enabling complete and clear upper, lower and peripheral visibility close to the feet
  • The frame of the Visor and Inhalation/ Exhalation is made of High Impact Synthetic material Black in colour.
  • There are NO METAL PARTS except fitting clips, screws and Metal Speech diaphragm.
  • It has Five point Head harness
  • The Full face Mask is also provided with EN 148/1   thread  for affixing single filter cartridges of  Comes with a smart Battery charger.
  • TM3P Protection —   HIGHEST  PROTECTION
  • Water decontamination version

 

APPROVALS :

CE  marked to EN 12942 and EN 14387 & EN 136 Class -3