INNOVA HALF MASK SILICON RESPIRATOR
- It is made of extremely soft, odourless yellow Silicon elastomer and has extended side flanges with Enhanced REVERT SEAL and specific contours at nose seat.
- It has 3 studs for fixing head harness for leak tight fitting of Half Mask.
- It has two inhalation ports with provision for fixing two cartridges/ Airline System through 25 mm male threads directly on either side and an exhalation port.
- The Inhalation port is circular and has twin plates with a cavity to stretch fit the mask for leaktight seal. The upper plate has 25 mm threads and lower plate has provision to affix inhalation NRV.
- The Exhalation port is also circular having twin periphery with a cavity to stretch fit the mask for leak tight seal. The outer periphery plate have threads to screw fit the exhalation cover. The exhalation NRV is affixed to the Exhalation port.
- It has 4 point cradle strap with elastic bands having all the ends LOCKED BY special LOCKING CLIPS made of Nylon to prevent pulling out of the elastic bands from the harness. The harness is detachable from mask and is black in colour. The head harness is adjustable.
- The equipment has NO metal parts including locking clips
- All parts of the Half Mask to be detachable, demountable and Spare Parts easily available.
- A test certificate from Government recognized test laboratory is attached with the offer, certifying that the material of Mask is Silicon.
- Same mask can be attached to Particulate filters, Gas filters, AIRLINE SYSTEM or SHORT DURATION COMPRESSED ESCAPE APPARATUS [ CAEP] by way of a swept back design.
CARTRIDGE FILTER TEDA IMPREGNATED :
- Charcoal filter TEDA (Triethyl Diamine) impregnated (5% ) activated carbon
- Mesh size 20 X 40
- Combined HEPA P100 + TEDA filter type (for radioactive particulates & iodine)